Laser Engraver Positioning Blocks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple blocks to screw to a sacrificial board to position laser engraving templates in the same place each time.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple blocks to be screwed to your sacrificial board, giving a straight vertical edge to but any templates up to.
This ensures the templates are placed in exactly the same place each time to engrave something.
Especially useful if you have a honeycomb bed, or a simple cake stand you place on top of the sacrificial bed ie
- Plywood to Cut (on top)
- Cake stand (to hold plywood off the sacrificial board to give a cleaner looking cut / burn)
- Sacrificial Board (To catch overturn through the plywood while cutting).
- Base board (with these blocks screwed down - at the bottom).
Using this ‘sandwich’, you can simply push everything up to the blocks on 2 axis ie x and y and the template / work piece on top can always be placed in the same spot each time.
The block measures:-
- 40mm High
- 40mm Wide
- 30mm Deep
I hope this is some use to you.
Please ‘Like’ and Download and post your Makes so I can see how it works for you.
Thanks