Laser Engraver Positioning Blocks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple blocks to screw to a sacrificial board to position laser engraving templates in the same place each time.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 37
- Makes
- 0
- Views
- 238
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple blocks to be screwed to your sacrificial board, giving a straight vertical edge to but any templates up to.
This ensures the templates are placed in exactly the same place each time to engrave something.
Especially useful if you have a honeycomb bed, or a simple cake stand you place on top of the sacrificial bed ie
- Plywood to Cut (on top)
- Cake stand (to hold plywood off the sacrificial board to give a cleaner looking cut / burn)
- Sacrificial Board (To catch overturn through the plywood while cutting).
- Base board (with these blocks screwed down - at the bottom).
Using this ‘sandwich’, you can simply push everything up to the blocks on 2 axis ie x and y and the template / work piece on top can always be placed in the same spot each time.
The block measures:-
- 40mm High
- 40mm Wide
- 30mm Deep
I hope this is some use to you.
Please ‘Like’ and Download and post your Makes so I can see how it works for you.
Thanks