1 / 8
DIY Monitor Riser / Desk Shelf Legs for ikea boards (4"/103 mm rise)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Monitor riser / Desktop Shelf legs for ikea boards
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 477
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I made this mainly because most 3d models on this and other sites had a very specific board width. I had two spare Ikea “shelves” lying around and wanted to make something that could fit either one.
So the vertical gap for these is about 3/4th inch (~21 mm) and 5/8th inch (~16 mm).
I have very lengthy stands and also included a mid point support. so essentially there are two unique part:
- A corner leg piece.
- this is what you will be 4 instances of to make the riser legs.
- an optional middle support part
- for very long boards that need to support heavy weight to prevent sagging.
these are about 103 mm/ 4 inches tall.
