1 / 8
DIY Monitor Riser / Desk Shelf Legs for ikea boards (4"/103 mm rise)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Monitor riser / Desktop Shelf legs for ikea boards
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 48
- Makes
- 0
- Views
- 480
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
I made this mainly because most 3d models on this and other sites had a very specific board width. I had two spare Ikea “shelves” lying around and wanted to make something that could fit either one.
So the vertical gap for these is about 3/4th inch (~21 mm) and 5/8th inch (~16 mm).
I have very lengthy stands and also included a mid point support. so essentially there are two unique part:
- A corner leg piece.
- this is what you will be 4 instances of to make the riser legs.
- an optional middle support part
- for very long boards that need to support heavy weight to prevent sagging.
these are about 103 mm/ 4 inches tall.
