Radxa Zero 3E case by Nenter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple click-in case for the Radxa Zero3E.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 468
- Wydruki
- 1
- Wyświetlenia
- 2254
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple case for the Radxa Zero3E.
This is my first ever 3D design.
I made 2 bases and 2 tops.
The bases have two options: One with all usb and micro-HDMI connections and another with just the usb-c to power the thing for preset tasks.
For the tops you can get one with header, another with a fan and one completly plain.
Please, feel free to comment and contact if you have any trouble or posible improve.
Enjoy!
Test print with TINA2:
+No support (not even for grilled version)
+PLA 1.75mm
+0.2mm layers
+40mm/s speed
+200 ºC temp
Update 26/06/2024:
-Added grilled case with microSD slot
-Added 3E label
-Improved pilars to click in the PCB
-Added new tops designs
-Improved usb-c and microHDMI holes position for a perfect alignment
--------
Please, consider my buymeacoffe. I'm new to this and (as you can see) my resources are limited.
https://buymeacoffee.com/nenter
This takes time and a LOT of material for trial and error.
This was my very first 3d model and took a lot of time, effort and filament to make this work.
I just want the money to keep learning and making things.
Thank you!