Print-In-Place Fidget Clicker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PIP Mini Fidget Clicker like a keychain with 3 different types of clicks.
- Ocena
- 4,225 / 5
- Polubienia
- 12 584
- Pobrania
- 125 549
- Wydruki
- 810
- Wyświetlenia
- 263 106
- Oceny
- 742
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I decided to modify my previous model (5 in 1) Fidget Toy Spinner
I wanted to get rid of the bearing and make the whole fidget smaller to fit the keys well. And as a bonus, I modified the model for print in place. So just print and click :)
Model Info
With this model, you can click in three different ways, on stick switch, knob switch or clicking gear wheel.
Dimensions:
25x42x9.5mm (WxHxD)
just enough to fit in your pocket or on your keys (key ring hole ready)
Printing
Here you have pre-prepared and tested g-code for printing. Thanks to more separated parts, the printing time is 1h 23m, but only less than 9g of filament is used for that. There is also a .3mf and .stl files available here. Be careful to place the model correctly on the print bed.
Material: PLA or PETG (preferably PETG for outdoor use)
Layer: 0.15mm
Infill: min 30%
Supports/Brims: NO