Print-In-Place Fidget Clicker
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.62 – €0.75 net (excluding VAT)
For file: Prusa Mini GCode / pip_fidgetclicker_04n_015mm_pla_miniis_46m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.68 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 45.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
PIP Mini Fidget Clicker like a keychain with 3 different types of clicks.
- Rating
- 4.225 / 5
- Likes
- 12,584
- Downloads
- 125,549
- Makes
- 810
- Views
- 263,106
- Reviews
- 742
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I decided to modify my previous model (5 in 1) Fidget Toy Spinner
I wanted to get rid of the bearing and make the whole fidget smaller to fit the keys well. And as a bonus, I modified the model for print in place. So just print and click :)
Model Info
With this model, you can click in three different ways, on stick switch, knob switch or clicking gear wheel.
Dimensions:
25x42x9.5mm (WxHxD)
just enough to fit in your pocket or on your keys (key ring hole ready)
Printing
Here you have pre-prepared and tested g-code for printing. Thanks to more separated parts, the printing time is 1h 23m, but only less than 9g of filament is used for that. There is also a .3mf and .stl files available here. Be careful to place the model correctly on the print bed.
Material: PLA or PETG (preferably PETG for outdoor use)
Layer: 0.15mm
Infill: min 30%
Supports/Brims: NO