Hardline Tach/Hour Meter Mount for a Parajet Mavrick Frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your Hardline Tach/Hour meter to Parajet Mavrick frame above the left swing arm connection with bolts and nuts.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Share Alike
I was looking for a better way to mount my Hardline Tach/Hr meter to my Parajet Maveric frame. When I purchased my motor, it had the meter zip tied to the frame (nothing wrong with it). While my motor was down for some maintenance, I decided to design a mount that would use the existing bolt holes in the meter and clamp onto the frame.
Update 6/29/2024 Version 2: Uploaded V2 for the model that changed the orientation of the lower clamps for layer strength. Changed the gap distance between the lower clamps and the tach side clamps to fully touch when tighten, this should help to keep from overtightening the bolts and causing damage. Added fillets to help with strength, reduce snag points, and ease of printing. Increased the nut recess size for easer placement. The nut recess will not support a locking nut for more security. Added debossed marking to aid in part assembly.
Update 6/28/2024 Version 1: The smaller clamps need to be printed on the long side for strength. If you have printed them was supplied, be careful not to over tighten the bolts or damage will occur. There will be a gap between the clamps.
Hardware Needed:
- 2 - M3x25mm hex head bolts
- 2 - M3 hex nuts
Print Settings (used in the bgcode file):
- PETG
- Main Body Infill - 15% (Flat side to the heat bed.)
- Clamps Infill - 25% (Flattest side to the heat bed. Through holes should be horizontal.)
- Main Body Perimeters - 2 side, 5 top and bottom
- Clamps Perimeters - 4 sides, 5 top and 5 bottom
- No Brim
- No Supports
