1 / 4
Hardline Tach/Hour Meter Mount for a Parajet Mavrick Frame — image 1
1 / 4

Hardline Tach/Hour Meter Mount for a Parajet Mavrick Frame

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mount your Hardline Tach/Hour meter to Parajet Mavrick frame above the left swing arm connection with bolts and nuts.

Rating
0 / 5
Likes
1
Downloads
35
Makes
0
Views
360
Reviews
0

Updated at source:

Model information

Category
Other Sports
License
Creative Commons — Attribution — Share Alike

I was looking for a better way to mount my Hardline Tach/Hr meter to my Parajet Maveric frame. When I purchased my motor, it had the meter zip tied to the frame (nothing wrong with it). While my motor was down for some maintenance, I decided to design a mount that would use the existing bolt holes in the meter and clamp onto the frame.

Update 6/29/2024 Version 2: Uploaded V2 for the model that changed the orientation of the lower clamps for layer strength. Changed the gap distance between the lower clamps and the tach side clamps to fully touch when tighten, this should help to keep from overtightening the bolts and causing damage. Added fillets to help with strength, reduce snag points, and ease of printing. Increased the nut recess size for easer placement. The nut recess will not support a locking nut for more security. Added debossed marking to aid in part assembly.

Update 6/28/2024 Version 1: The smaller clamps need to be printed on the long side for strength. If you have printed them was supplied, be careful not to over tighten the bolts or damage will occur. There will be a gap between the clamps.

Hardware Needed:

  • 2 - M3x25mm hex head bolts
  • 2 - M3 hex nuts

Print Settings (used in the bgcode file):

  • PETG
  • Main Body Infill - 15% (Flat side to the heat bed.)
  • Clamps Infill - 25% (Flattest side to the heat bed. Through holes should be horizontal.)
  • Main Body Perimeters - 2 side, 5 top and bottom
  • Clamps Perimeters - 4 sides, 5 top and 5 bottom
  • No Brim
  • No Supports

 

Tags