199 models
I created a trash can that uses the FITS pocket to mount on the back of the center console. There are two versions. A shorter, thicker walled one that is more flush with the top of the FITS pocket and a taller one that has thinner walls…
This is a kit I designed that converts the Nerf Maverick into a Talon magazine compatible flywheel blaster that I have dubbed the “Mayfly”. It was inspired by an illustration done by the visionary Hotkoin, which you can see here: /…
This is a generic phone holder that goes into the cubby hole FITS slot adapter I intend for this to be used with my pixel 3/4 phones but you can modify the dimensions to fit your phone / case. I printed this on a Creality Ender 3 with…
This drawer is designed to make use of that pointless cubby to the right of the Ford Maverick radio display. This fits snug in the cubby hold, making use of the ledge near the outside to hold it firmly in place. The drawer holder does not…
Found a great design for a trash bin that fits neatly in front of the console by tfutral51. Really is a perfect fit. Looking at the model, there were no internal fillets, so it was really thin in the corners. I was worried about it…
This is an adapter designed to add a FITS slot to the cubby hole on the dash. I added a blank press fit plate to hide the space in the back and add some stiffness via press fitting against the walls. This is designed to be used with…
I wanted to separate the various junk I keep in my glovebox. I didn't find any dividers that would work for the Maverick, so I designed one. Since the glove box narrows slightly closer to the door, and that's a very difficult design, this…
This is a divider for the Ford Maverick rear under-seat compartment, it utilizes the Ford FITS integrated mounts. The design is comprised of two main parts, the divider and the FITS brackets. The brackets bolt on to the divider using…
This is a minifigure scale (ish?) Nerf gun I designed a while ago. A minifigure should be able to hold it by the handgrip as well as the spring pull-back part I don't know the name of. Print instructions I've printed most of mine in a…
Rim and drift tire for Maverick Strada RX 1:10 RC car. 12mm hex hub, 88mm in diameter , 31mm wide (62x29mm rim). I printed the rim in ABS and the tire in TPE (Fiberflex 30D), 10% gyroid infill. No glue needed, its a tight fit. If you make…
Originally found from: https://www.thingiverse.com/thing:5393377/files I remixed this design to include a hole to drop items in the rest of the console beneath, without lifting the tray.
Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: 0.2mm Infill: 25% Filament: Generic PLA Grey Notes: Honeycomb infill 40mm/s 2 perimeters 3 top and bottom layers
Simple trash bag holder for FITS integration. Files print as oriented with no support, best to print in PETG, ABS, or similar temp-resistant plastic. Feed a bag through the hole, pull the mouth around the ring, and secure it with the…
This is a cup holder designed to be mounted in the Ford FITS mounting slot in the back seat of the Ford Maverick truck. Parts required: 2X 3mm heat set threaded inserts or 2X 3mm nuts 2X M3X20mm socket head cap screws The tolerances on…
This drawer is designed to make use of that pointless cubby to the right of the Ford Maverick radio display. This fits snug in the cubby hold, making use of the ledge near the outside to hold it firmly in place. The drawer holder does not…
There are plenty of hitch covers around, but nothing that fit and was plain. This is as simple as it gets.
This is a Maverick N-Strike Barrel Attachment Muzzle, which, once installed, allows N-Strike Style barrels to be attached to the Maverick. It replaces the existing muzzle, which can be removed after the blaster is taken apart. This muzzle…
I wasn't happy with the other outlet cover designs available, so ended up designing one myself. The latching mechanism should be flexible enough without snapping, and on my Maverick, it produces a tight fit (after a dozen iterations).…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a heavy duty cup holder expander made to fit standard 16oz tall cans (~66.5mm), 12oz tall cans (~57.5mm), and larger hydroflask style water containers (88.5-90mm). There is about 0.5mm clearance on either side. I printed this at…
This is an extender that you slide over the vent under the front seats to help redirect the air to the back seat with a 30 degree angle. I printed with NO SUPPORTS - standing straight up on the bed with a BRIM to help hold it. My Maverick…
Based off the design by Kl0ck, but remade with the official CAD geometry provided by Ford for a better fit in the mount. Also features slightly bigger openings with better angles to fit large Yeti-style tumblers. Print upside down, no…
TOP GUN MAVERICK LOGO Change Thickness to 3mm 1st layer 1.25mm 2th layer 2mm 3th layer 3mm Enjoy
This model is a remixed version of tailgate covers for a Ford Maverick. I added vent openings to allow any trapped water to drain or evaporate.
This is remix of the low profile cupholder done by RedBaron97. I added a 3M cable grabber onto the flat section I added between the cupholder holes so I could route a cable for charging an android tablet / phone on the road. I printed…
This is a blank plug designed to fit into and fill a 2022 Ford Maverick FITS Slot. I had some fitment problems on the sides of my FITS slots so the dimensions have been slightly modified and I added "Ford" text to the front of the model.…
This is a pair of seat hooks to hold bags (obviously) and a bar with a FITS slot on it. I printed this on a Creality Ender 3 with eSUN PETG using the following settings: Print Temperature: 245 Plate Temperature (Initial Layer): 80 Plate…
*I made a customizable version of this if one of the pre-made one is not the right size. Check it out here: https://makerworld.com/en/models/480005#profileId-391473 Just a simple adapter to fit larger water bottles in the Ford Maverick…
Use a M5 allen bolt and nut for the shoulder support. You can add a soft bottom protector (optional) printed in TPU with the following ORCA parameters: Wall loop = 1, Top and bottom shell layer = 0.Infill Giroide 20% and glue it whit…
I was inspired by RexiLabs on MakerWorld who is designing all sorts of 3D printed scale missiles but hasn't made a Maverick yet. This is a 1:10 scale recreation of the AGM-65 I designed based on images I found online. The 3mf file…
This is a Slide Replacement and Stock Attachment Point for the Nerf Maverick. It uses the 3 small screws as well as the N-Strike Attachment nub and spring from the stock slide of the Nerf Maverick. It features a N-Strike compatible rail…
The Ford Maverick bed storage cubby is really handy for storing bungees, tie-downs, and other gear. However, I found trying to jam everything in and closing the lid without items spilling out a bit annoying. I designed this storage bin to…
Got it in my head that I would start printing some accessories for the truck and I happened across rcs128's console divider design. Great way to break down that space. I was worried about long-term durability, so I thickened the plates,…
Center console divider to help organize the the space.
Remix of a remix.. :) I made this version a few millimeters smaller so that it will sit deeper in the console.
Top Gun Maverick logo in 3D. 5mm high.
El modelo está adaptado para que se pueda imprimir con M600 si solo dispone de un extrusor.
Rafts: No Supports: No Resolution: .2mm Infill: 20% Filament material: PETG Notes: It took 11.5 hours to print at a speed of 60 mm/s and Z-Seam set to random. This is my model I submitted to Thingiverse - which still has not made it…
.step file of a male FITS insert to be used as a starting point for various accessories
Inspired by the GearTrack system, this modular grocery hook is easy to install, is snug and slidable. Best of all, you do not need to pop off the end-cap of your bedrail to install. Keep a pile of them in your hidden cubby in the truck…
This is a center console tray I created with rounded edges. All of the other trays have sharp edges that scratch the inside the console. give it a Try and let me know what you tink. Give it a like or a make. Thanks. Im not sure if all of…
This is a remix of a phone holder for a 2022 Ford Maverick, designed to hold a Samsung Galaxy S22 Ultra. Phone cases are accounted for, and only the holder was resized so this still actually fits in the slot on the vehicle. Don't forget…
This replaces the wood dowel that rattles around in Mossberg 500 Maverick 88 can be printed in pla or tpu honestly any material should be fine. This takes you from 5 round in the magazine down to 2 to make it legal for hunting.
This is a bar with a FITS slot on it. This is designed to slot into the bag holders I made. I put a little screw on each end so it doesn't slide out - gonna add holes eventually. I printed this on a Creality Ender 3 with eSUN PETG using…
Ford Maverick center console organizer. I wanted a organizer that fit a tissue box and still have room for plenty of other storage. The tissue box has plenty of space to easily pull in and out to access the large storage under it, kind of…
Just print and slid into place. A well placed filament swap will give you the 2 tone effect. Use color that compliment your rig. Print in PetG or some other UV stable material for longevity. Printed logo down, no supports needed.
This is a two part model A form fitted base that fits nice and snug into the cup holder A top that threads into the base and provides a ~97mm cup to accommodate a yeti 1l water bottle. Printing Notes: Both STL files are ready to print…
Red Barron's FITS clip is just getting the playing field started. Thank you so much for delivering what Ford has decided is a low priority. This is meant for up to 4 grocery bags. Don't go crazy hanging watermelons from it or anything and…
This is a stand / hanger to hold a Baofeng UV-82C with external mic attachment. I designed this to work with a FITS slot attached to an adapter that fits in the cubby hole on the dash. I printed this on a Creality Ender 3 with eSUN PETG…
Designed for Vector Optics Maverick GenII (SCRD-12II). v4 front: This new variant has the polycarbonate piece at a slight angle to avoid reflections from the emitter, especially indoors with high illumination levels. Either a friction…
I wanted fillers for the gaps between the front seats and the center console of my 2024 Ford Maverick so I don't lose stuff that could fall in the gaps. I made one for the passenger side and one for the driver's side. They are customized…
I went about this whole project in the TOTAL wrong order, lol. First I found this cup holder trash can lid on Thingiverse and thought it looked great. https://www.thingiverse.com/thing:5948543 I didn't yet have a trash can so I then…
Replacement bed rail caps for 2022 Ford Maverick. Mine broke so I designed these replacements. Recommend using PETG. Printed mine using generic PETG settings from Prusaslicer. Supports : Yes Infill : 20%
Hitch Cover 2" with American Flag designed for Ford Maverick but should fit any 2" hitch receiver Print face down. Strong tree supports “On build plate only”.
First file is a hook I made in order to hang my recovery strap behind the back seat from an existing spot in the truck. Second file is two hooks which suspend a cheap harbor freight toolbox behind the back seat, they hook into metal loops…
Remixed because I wanted to change some of the walls and the center handle. IMO, i would still want to improve the undecut.
Just wanted to add some color to my cupholder. Fits in the front cupholder tray. The STL file is just the grid. The picture of it in my truck is my personalized version :) This has a slight angle in height - install with the small side…
Alternate version of https://www.thingiverse.com/thing:7105717 I just changed the text to 'Super Light Duty' because I liked the idea form spiritkanaka. There's two versions of the STL. One that's scaled for the tailgate, and another to…
I designed this cupholder with most of the popular large water bottles in mind, so it can hold Hydroflasks, Stanley cups, Owalas, etc. There are also 2 different sized sleeves that drop in to accommodate smaller canned drinks. I highly…
Designed to fit 12.5mm button switches. Designed to mount with Velcro or double stick tape. Velcro mount inspired by “Kl0ck ”
Do you ever eat Chick-fil-a while you drive? Or have a passenger princess that is tired of holding all the sauces, nuggets, and napkins? Gone are the days of dry chicken nuggets, spilled sauce containers, and the resulting domestic…
I modeled these inserts for my Ford Maverick after seeing that they're charging $30 for a piece of plastic on Amazoon. There is 3 versions, one blank so you can set a custom emboss in PrusaSlicer, and two US Flag variants (Monochrome &…
After getting a spray in bed liner for my Maverick the OEM bed cover plate no longer fit. Via Fusion 360 I designed a new plate with looser specs. Unlike over plates available this plate has the standoffs needed to plug in the Ford 12v…
Haven't finished printing, still a work in progress. This is an insert model to add to your Maverick for the short cubbies between the console and the shifter. Adds two small cupholders, a phone slot, and a tray while still giving some…
Print laying down with no supports. The bigger you print it, the more detailed the logo will be. There's a lot of small, sharp lines
I could not find a good free model of a phone mount cubby insert for my Ford Maverick so I designed my own using the 3-D scan data uploaded by https://www.printables.com/@jalcober_222386 . Print face down using PETG or other high…
Uploading this in case anyone wants my tweak of m7550's excellent hole cap design, if you're going to print yours out of a rigid material, his is the way to go and I've linked it below. Because I have an unhealthy obsession with TPU, I…
I was adding bedlighting and wanted to make a new coverplate for the switch but found that the models that I found on Printables or Thingaverse did not fit or were poorly designed so I made my own. I did borrow the basic design of the…
3D scan of the cubby next to the touch screen on the ford maverick.
This is for those that want to add color next to the rear window on the Ford Maverick. This model is solid - there is no cutout of the POWERCAT in this model. :) The back side has a 1mm border to allow for 3m automotive tape. Print face…
Ford maverick pickup truck scan simplified from ~1mil kb to ~10k kb
I originally tried to print the design from @rfinnie_171430 but I was never able to get the latching mechanism to print properly or without breaking it. On the other hand I liked the clip design from @Octantis_782 . So this is a mix of…
Rim for original rubber tires, if you break the original Maverick Strada RX rim. (1:10 scale) 12mm HEX 62mm diameter 29mm width. The tire is glued on.
Designed this to swap the sub with a Dayton DCS165 as per this thread on MaverickTruckClub. https://www.mavericktruckclub.com/forum/threads/simple-b-o-upgrade-and-sub-solution.38884 I printed in ABS 30% infill, 5 layers top and bottom, 4…
Based off the original model by Kl0ck, but redesigned using the official CAD geometry provided by Ford for a better fit and easier printing with no supports. For use with Kl0ck's headrest seat hooks:…
Wanted to create a bed rail clamp that I could hang my ice scraper / brush from in the winter. This would allow it to hang dry and not get the interior seats/floor all wet. After use, my brush seemed loose. Added an additional clamp that…
This is a blank designed to cover up the cubby hole on the dash. This is a remix - I modified the dimensions a tiny bit, filled in the holes, and added a grab bar. I printed this on a Creality Ender 3 with eSUN PETG using the following…
Ford FITS Square Tissue Box Holder Updated Model
This is a stand / hanger to hold a Baofeng UV-82C. I designed this to work with a FITS slot attached to an adapter that fits in the cubby hole on the dash. I printed this on a Creality Ender 3 with eSUN PETG using the following settings:…
Do you like the NERF Maverick despite it's age? I do! It has one issue though - the drum only takes 6 darts, and reloading it can't really be considered quick. So I decided to fix that issue by allowing it to use custom made clips! You…
Hi It is my wrench to link in my RC Car.
A wonderful thank you again for the remixable designs these are based on. Printing quality is best achieved by printing vertically on this one. Keeps the rounded piece flush instead of goobered with support roughness. The cable goes…
After purchasing a 2024 Ford Maverick XL, I was a bit disappointed to find that it wasn’t possible to add or modify the console to include the Ford wireless charging module without cutting a hole in the console, which I wasn't willing to…
Customized version of https://www.thingiverse.com/thing:2222706 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2222706 Instructions Using the following options: count = 4 wall = 2.0 wall_t = 2 oa_w = 60…
Hi it's my body post brace for HSP Flying Fish
Some Ford Maverick accessories that made my life slightly better. Maybe you can use them too. I constantly rub my leg against the rubber shifter knob of the Ford Maverick while driving, accidentally changing gears. I made this simple ring…
This is a cup holder specifically for espresso cups, which don't fit in the standard cup holders, it uses the Ford FITS mounting system. I've included two models, one with the handle facing straight out from the mount and one at an angle…
A simple hook which snaps nicely in place. Held in by the load applied to it, yet still easy to remove by pulling upwards. Print it in PETG, if you don't want it to melt on a summer day.
leayer eight: 0.2 multipart body are 0.4mm height perimeter 0.4mm
Here is the awesome looking Dallas Mavericks Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a commercial license to sell my prints? Join as a member to my…
This Maverick keychain .step file is ready to for go AMS. Change the colors in the ‘objects’ box under Process in Bambu Studio. Those without AMS can print this keychain by adding a pause at layer 16, or 3.2mm, and changing the color…
Designed for a Samsung s23 Ultra with a case and it fits snug. Designed using the FITS mount from Ford as the base.
A mount for the Hot Wheels version of the Ford Maverick that fits in the Maverick cubby. Has a hole in the bottom front where a piece of filament or small nail can fit to go into the notch in the bottom of the cubby so it doesn't slice…
--------V1.1 | 11/16/21 ---------- Added 5 inch tall edition that gets it further off the ground. Going too much higher than this will result in not fitting on most printbeds, as well as instability in height/weight ratios with the…
I added a US Flag to this Hitch Cover, and it's parametric, so you only have to change the Hoist (Length)) Measurement of the flag, or use the provided 1.5in Model. Attached is a 1.5in Flag .3MF model, as well as the .F3D. If you have…
It is best to print from TPU. PLA needs to be heated a little with a heat gun to make it fit better to the roof. Stick with strong tape or use 4 screws.
Printed on a Prusa MK3s+ with PETG 15% infill.
This is a negative of the delightful FITS adapter done by Redbaron97. It's increased in size from the clip itself by .05% to be someone reflective of the actual vehicle and your likely tolerances. I've included two recessed screw holes in…
