Ford Maverick Cup Holder Adaptor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapts the stock 78mm cup holders to fit a 96mm mug/bottle
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 172
- Makes
- 1
- Views
- 1,210
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a two part model
- A form fitted base that fits nice and snug into the cup holder
- A top that threads into the base and provides a ~97mm cup to accommodate a yeti 1l water bottle.
Printing Notes:
Both STL files are ready to print with plenty of tolerances for the threads and should not need any post processing. The bottom should be printed up-side-down (hex pattern side facing the bed) and is designed with overhangs that wont need any supports. I printed with PLA+ and it seems plenty sturdy.
I have attached the fusion file as well if you feel the need to change the cup size you should be able to without too much trouble. Just note that the size of the octagon is designed such that it will mesh nicely into a second one if you print a second.
I designed this from scratch after not finding what I wanted in other models (namely a tight fit that didn't fall over and the correct size for my bottle and mug).