Ford Maverick Wireless Charging Pad
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wireless charging pad for my 2024 Ford Maverick XL
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 86
- Makes
- 1
- Views
- 1,441
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
After purchasing a 2024 Ford Maverick XL, I was a bit disappointed to find that it wasn’t possible to add or modify the console to include the Ford wireless charging module without cutting a hole in the console, which I wasn't willing to do.
As an alternative, I considered installing an invisible wireless charging pad underneath the console, as demonstrated in this video, but the charging distance was too far for my phone to charge properly.
Instead, I decided to use the cabling I had already routed under the console from the fuse box, purchased a wireless charging pad (#ad), and designed a 3D-printed part to fit flush inside the console area.
It worked perfectly and now charges my phone.
Filename:
- Ford_Maverick_Wireless_Charging_Pad_v1.stl
Print Settings:
- Resolution: 0.2mm or higher Layer Height (0.4mm Nozzle)
- Filament: PETG/ABS/ASA recommended (PLA will work, heat could be an issue)
- Supports: No
Cabling Run:
See below, I ran the cable up and over the console seen here:
Then I removed the panel here to finish running the cable underneath and plugging it into the USB charging port I added from the invisible wireless charging MOD I tried.
