Ford Maverick Wireless Charging Pad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wireless charging pad for my 2024 Ford Maverick XL
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 86
- Wydruki
- 1
- Wyświetlenia
- 1441
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
After purchasing a 2024 Ford Maverick XL, I was a bit disappointed to find that it wasn’t possible to add or modify the console to include the Ford wireless charging module without cutting a hole in the console, which I wasn't willing to do.
As an alternative, I considered installing an invisible wireless charging pad underneath the console, as demonstrated in this video, but the charging distance was too far for my phone to charge properly.
Instead, I decided to use the cabling I had already routed under the console from the fuse box, purchased a wireless charging pad (#ad), and designed a 3D-printed part to fit flush inside the console area.
It worked perfectly and now charges my phone.
Filename:
- Ford_Maverick_Wireless_Charging_Pad_v1.stl
Print Settings:
- Resolution: 0.2mm or higher Layer Height (0.4mm Nozzle)
- Filament: PETG/ABS/ASA recommended (PLA will work, heat could be an issue)
- Supports: No
Cabling Run:
See below, I ran the cable up and over the console seen here:
Then I removed the panel here to finish running the cable underneath and plugging it into the USB charging port I added from the invisible wireless charging MOD I tried.
