Ford Maverick 12V Outlet Cover Plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Another 12V outlet cover plate for the Ford Maverick which should work with most commonly available outlets.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 112
- Makes
- 1
- Views
- 808
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
I originally tried to print the design from @rfinnie_171430 but I was never able to get the latching mechanism to print properly or without breaking it. On the other hand I liked the clip design from @Octantis_782. So this is a mix of the two, remodeled from scratch in Solidworks.
This will fit both plastic nut designs from the Marinco 12V DC outlets.
Print with 4 vertical perimeters for maximum strength of the clip. I printed using PC but PETG should also work. PLA of course not recommended as it does not do well outdoors. The clip is a tight fit, use a punch to hammer it in. But I recommend gluing/cementing it anyway.
Tested on a Maverick 2024 Lariat with bedliner.