Ford Maverick 12V Outlet Cover Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another 12V outlet cover plate for the Ford Maverick which should work with most commonly available outlets.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 112
- Wydruki
- 1
- Wyświetlenia
- 808
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
I originally tried to print the design from @rfinnie_171430 but I was never able to get the latching mechanism to print properly or without breaking it. On the other hand I liked the clip design from @Octantis_782. So this is a mix of the two, remodeled from scratch in Solidworks.
This will fit both plastic nut designs from the Marinco 12V DC outlets.
Print with 4 vertical perimeters for maximum strength of the clip. I printed using PC but PETG should also work. PLA of course not recommended as it does not do well outdoors. The clip is a tight fit, use a punch to hammer it in. But I recommend gluing/cementing it anyway.
Tested on a Maverick 2024 Lariat with bedliner.