Ford FITS Blank Plug (2022 Ford Maverick)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Blank plug for FITS slot inside the 2022 Ford Maverick.
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 309
- Makes
- 0
- Views
- 2,041
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
This is a blank plug designed to fit into and fill a 2022 Ford Maverick FITS Slot. I had some fitment problems on the sides of my FITS slots so the dimensions have been slightly modified and I added "Ford" text to the front of the model. If you have issues utilizing the model I remixed this from, give this one a try. I printed this on a Creality Ender 3 with eSUN PETG using the following settings:
Print Temperature: 245
Plate Temperature (Initial Layer): 80
Plate Temperature: 70
The rest of my settings were autoapplied via the eSun Black PETG with 0.4mm nozzle extruder settings in Cura 4.13.
Print time total was 1 hour 18 minutes.
Fitment was tested in rear center console and under back seat. No wiggle, solid hold, no removal problems.
Original Model: https://www.thingiverse.com/thing:5114828
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Yes
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: eSUN PETG Black, Orange
Notes:
I printed most of my small prints with a raft but you shouldn't have too as long as you have good bed adhesion. If you do print with a Raft, be sure to remove the raft while the print is still warm so you don't have to snap it off later.
Category: Automotive