Ford Maverick Rear Cup Holder (FITS)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€9.06 – €11.07 net (excluding VAT)
For file: Cup Holder_0.2mm_PETG_MK3S_10h28m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €10.06 excluding VAT (range midpoint).
- Weight reported by the author
- 126 g
- Print time reported by the author
- 10.46 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Cup holder for use with the Ford FITS mounting system used in the Maverick truck.
- Rating
- 5 / 5
- Likes
- 52
- Downloads
- 425
- Makes
- 1
- Views
- 2,328
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a cup holder designed to be mounted in the Ford FITS mounting slot in the back seat of the Ford Maverick truck.
Parts required:
- 2X 3mm heat set threaded inserts or 2X 3mm nuts
- 2X M3X20mm socket head cap screws
The tolerances on the screw holes are intentionally tight, so you may want to run a screw through them a couple of times before assembly.
I used supports everywhere.
*Edit 7/28/2023: Added model that uses nuts instead of heat sets.