1 / 12
1x1 Gridfinity Dremel Accesories Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dremel accesories holder for gridfinity......optimised to get a lot of accesories by 1x1 grid and with ease of use.
- Ocena
- 5 / 5
- Polubienia
- 63
- Pobrania
- 370
- Wydruki
- 1
- Wyświetlenia
- 1354
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (30)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (198)Powiązane
1. Introduction
Dremel accesories holder for gridfinity......optimised to get a lot of accesories by 1x1 grid and with ease of use.
2. Revision History
| Version | Description | Date |
|---|---|---|
| A.1 | Initial Release | 25/06/2024 |
| A.2 |
| 28/06/2024 |
3. Printing Instructions
- All elements
- PETG/PLA
- Layer Height: 0,3 mm to speed up the print
- Min 2 perimeters
- No supports
- Min 15% infill
4. Materials for Assembly (BOM)
- The printed parts
- Your Dremel accesories
5. Assembly Instructions
- Nothing to say…just install your holders on a gridfinity grid. And Sort your accesories as per pictures for isntance.
5. Notes
- G-code file only made for MK3S+. The file contains some custom lines to add a pre-heating before the printing to avoid oozing during the mesh bed levelling. And a timer at the end of the print to buzz a sound once the parts has cooled down.
- Do not use the g-code file on other machines than MK3S+ ! In any case, I recommend you to slice the .stp files by yourself to make your own g-code files.
Have a nice print !
Last note! I've spent quite a lot of time designing, iterating and prototyping on all my models. Therefore, if you enjoy them, please don't forget to like+download and then rate them, so that I can earn so prusaments to continue ;)