1x1 Gridfinity Dremel Accesories Holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.84 – €1.03 net (excluding VAT)
For file: Gridfinity_Dremel_SandingDiscsPots_Holder-V2.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.93 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 1 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Dremel accesories holder for gridfinity......optimised to get a lot of accesories by 1x1 grid and with ease of use.
- Rating
- 5 / 5
- Likes
- 63
- Downloads
- 370
- Makes
- 1
- Views
- 1,354
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
1. Introduction
Dremel accesories holder for gridfinity......optimised to get a lot of accesories by 1x1 grid and with ease of use.
2. Revision History
| Version | Description | Date |
|---|---|---|
| A.1 | Initial Release | 25/06/2024 |
| A.2 |
| 28/06/2024 |
3. Printing Instructions
- All elements
- PETG/PLA
- Layer Height: 0,3 mm to speed up the print
- Min 2 perimeters
- No supports
- Min 15% infill
4. Materials for Assembly (BOM)
- The printed parts
- Your Dremel accesories
5. Assembly Instructions
- Nothing to say…just install your holders on a gridfinity grid. And Sort your accesories as per pictures for isntance.
5. Notes
- G-code file only made for MK3S+. The file contains some custom lines to add a pre-heating before the printing to avoid oozing during the mesh bed levelling. And a timer at the end of the print to buzz a sound once the parts has cooled down.
- Do not use the g-code file on other machines than MK3S+ ! In any case, I recommend you to slice the .stp files by yourself to make your own g-code files.
Have a nice print !
Last note! I've spent quite a lot of time designing, iterating and prototyping on all my models. Therefore, if you enjoy them, please don't forget to like+download and then rate them, so that I can earn so prusaments to continue ;)