dm2021/mum14 jarm adapter (j-dapt plate) M4 screw night vision
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It works okay, there is a bit of a wiggle. I gave up on fine-tuning it when I got an actual adapter
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 497
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
I haven't worked on it in a while. If I remember correctly, an M4 7mm screw works like a charm. I am uploading main files 2 files: one with a cutout for the j-arm and one without.
My j-arm is a cheap Chinese one and the adapter with a cutout might wiggle on yours.
The one without the cutout has a shallow hole approximately where the actual cutout should be. I suggest you screw it in and see where it intersects with the j-arm stabilizing piece, and then file it down or use a dremel.
I will also upload some old files of slightly different designs. I don't suggest you use them, because they have flaws. I don't remember which is which. If you're looking for something specific, I might have already tried it. Check and see