dm2021/mum14 jarm adapter (j-dapt plate) M4 screw night vision
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It works okay, there is a bit of a wiggle. I gave up on fine-tuning it when I got an actual adapter
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 62
- Makes
- 0
- Views
- 497
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
I haven't worked on it in a while. If I remember correctly, an M4 7mm screw works like a charm. I am uploading main files 2 files: one with a cutout for the j-arm and one without.
My j-arm is a cheap Chinese one and the adapter with a cutout might wiggle on yours.
The one without the cutout has a shallow hole approximately where the actual cutout should be. I suggest you screw it in and see where it intersects with the j-arm stabilizing piece, and then file it down or use a dremel.
I will also upload some old files of slightly different designs. I don't suggest you use them, because they have flaws. I don't remember which is which. If you're looking for something specific, I might have already tried it. Check and see