Magnet collar for 3Devo FM1 Filament Extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple magnet collar attachment for the FM1 Filament Maker from 3Devo
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
This is a simple 3-Piece magnet collar attachment for the FM1 Filament Maker from 3Devo. It is a result of me repeatedly knocking over the filled pipe on accident in my workshop, spilling everything on the floor. This fixes the problem. Depending on the strength of the magnets and the use of the spacer, bumping into the pipe with enough force will either break it, or knock over the entire machine.
The original acrylic pipe is friction fit inside the top half of the model. The bottom half of the model is glued to the machine. The spacer is an intentionally loose fit inside the bottom half.
32 8x3mm Magnets are required for assembly and strong glue is recommended. Depending on the strength of the magnets, the spacer is required in order to separate the whole thing at all.
Reference Print settings:
rPETG
0.3mm Layer height with 0.6mm Nozzle
3 Top/Bottom shell layers
2 Wall loops
15% Honeycomb Infill
No supports needed
Textured PEI Plate for better surface finish