Neutrik d-size chassis connector wall plates and frames
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Square wall socket plates and frames for Neutrik d-size chassis connectors
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 546
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall socket plates for Neutrik speakON and other d-size chassis connectors, to be used with Attema U40/U50 wall junction boxes. Frames included allow for 2x3 and 1x3 configurations.
2 versions of plates included, 4.4mm recessed for the plastic connectors, 2mm recessed for the metal chassis connectors of which 1 compatible with the etherCON. The 3rd plate is just a hole to run cables through.
A little tool to rotate the mounting points of the Attema U40/U50 is also included.
Note: to print the back plates on an Ultimaker 2, disable the skirt etc.
Materials and methods
Print list:
- 1x3-back-plate
- 2x3-back-plate
- wall-socket-2mm
- wall-socket-4mm
- wall-socket-hole
- wall-socket-rotator
Part list:
- any d-size chassis connector in 2mm or 4.4mm
- some screws, din 7983 2.9 x 9.5
Part links:
- http://www.neutrik.com/en/speakon/speakon-chassis-connectors/speakon-chassis-connectors/
- http://www.neutrik.com/en/xlr/xlr-chassis-connectors/dlx-series/
- http://www.neutrik.com/en/data/ethercon/ethercon-chassis-connectors/d-series/
- https://www.microschroeven.nl/index.php?action=article&aid=1749&group_id=-4&lang=nl
- https://www.attema.com/en_NL/products/installation/traditional-flush-mounting-boxes/1230-u50-junction-box/