Neutrik d-size chassis connector wall plates and frames
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Square wall socket plates and frames for Neutrik d-size chassis connectors
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 50
- Makes
- 0
- Views
- 547
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall socket plates for Neutrik speakON and other d-size chassis connectors, to be used with Attema U40/U50 wall junction boxes. Frames included allow for 2x3 and 1x3 configurations.
2 versions of plates included, 4.4mm recessed for the plastic connectors, 2mm recessed for the metal chassis connectors of which 1 compatible with the etherCON. The 3rd plate is just a hole to run cables through.
A little tool to rotate the mounting points of the Attema U40/U50 is also included.
Note: to print the back plates on an Ultimaker 2, disable the skirt etc.
Materials and methods
Print list:
- 1x3-back-plate
- 2x3-back-plate
- wall-socket-2mm
- wall-socket-4mm
- wall-socket-hole
- wall-socket-rotator
Part list:
- any d-size chassis connector in 2mm or 4.4mm
- some screws, din 7983 2.9 x 9.5
Part links:
- http://www.neutrik.com/en/speakon/speakon-chassis-connectors/speakon-chassis-connectors/
- http://www.neutrik.com/en/xlr/xlr-chassis-connectors/dlx-series/
- http://www.neutrik.com/en/data/ethercon/ethercon-chassis-connectors/d-series/
- https://www.microschroeven.nl/index.php?action=article&aid=1749&group_id=-4&lang=nl
- https://www.attema.com/en_NL/products/installation/traditional-flush-mounting-boxes/1230-u50-junction-box/