1 / 4
Garage Parking Assist
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thing to help you to park your car always at the exact same place in the garage. Print in white, and use a red or…
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 94
- Wydruki
- 1
- Wyświetlenia
- 825
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 5)Remiksy (0)Kolekcje (21)Powiązane
Thing to help you to park your car always at the exact same place in the garage.
Print in white, and use a red or black sharpie to fill in the vertical lines.
Or, print in black, and use a silver sharpie, whiteout, nail polish, or white paint.
There is a 0.15" hole on the back to allow for hanging onto a small nail.
Print details:
- Best to use ABS (or other outdoor plastic), as it has a much longer lifespan and is superior for sunlight, moisture, and heat than PLA.
- I ran out of white filament part way through my print (hence the incomplete part in the photo). White seems to be the best colour.
- Sharpie works best. I used white nail polish and a toothpick on the black ABS, but it didnt turn out perfectly. Again, sharpie is best!
- Printed with a 5mm brim.
- 12 grams of ABS.
Print Settings
Printer Brand:
UltiMaker
Printer:
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%, gyroid
Filament: Ultimaker ABS
White
Category: Automotive