1 / 4
Garage Parking Assist
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Thing to help you to park your car always at the exact same place in the garage. Print in white, and use a red or…
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 94
- Makes
- 1
- Views
- 825
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Thing to help you to park your car always at the exact same place in the garage.
Print in white, and use a red or black sharpie to fill in the vertical lines.
Or, print in black, and use a silver sharpie, whiteout, nail polish, or white paint.
There is a 0.15" hole on the back to allow for hanging onto a small nail.
Print details:
- Best to use ABS (or other outdoor plastic), as it has a much longer lifespan and is superior for sunlight, moisture, and heat than PLA.
- I ran out of white filament part way through my print (hence the incomplete part in the photo). White seems to be the best colour.
- Sharpie works best. I used white nail polish and a toothpick on the black ABS, but it didnt turn out perfectly. Again, sharpie is best!
- Printed with a 5mm brim.
- 12 grams of ABS.
Print Settings
Printer Brand:
UltiMaker
Printer:
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%, gyroid
Filament: Ultimaker ABS
White
Category: Automotive