HDX Plastic Shelf Leg Extensions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are extensions you can print and add on to the legs of your HDX brand shelf to add height to each shelf.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
You can add these leg extensions to your shelf to make the space under each shelf larger.
I've rendered 3mf files for 50mm, 80mm, and 100mm extensions, but there's also a scad file included where you can alter things yourself. It does require the installation of the BOSL2 library.
The height listed for each extension is the amount the space will be increased. The total height is taller(by 22mm) because it includes the top part that nests into the shelf above.
Printed in PLA at 210C with 0.3mm layer height for better layer adhesion. Although the walls are fairly thin I don't think strength will be a problem for most uses as long as you print them vertically.