1 / 6
Canpedo - Soda Can drink holder Koozie — zdjęcie 1
1 / 6

Canpedo - Soda Can drink holder Koozie

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is just a fun model designed to hold a 66mm can (standard 12oz size) loosely based on the shape of a naval torpedo.

Ocena
5 / 5
Polubienia
20
Pobrania
55
Wydruki
2
Wyświetlenia
293
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Summer
Licencja
Creative Commons — Attribution — Noncommercial

I wanted to come up with a fun summer design for a drink holder. I decided to go with a torpedo inspired design since we live in a large Navy area. I printed this in a red white and blue theme, but it also works well as a single color. 

This model also has a vent in the bottom because I found out that not all cans are made the same and some were nearly an air tight fit. I wanted it to be a tight fit but some are just too tight. Although we did discover that the vent hole can kinda double as a squirt gun depending on how snug the fit is. 

If you run into fitment issues or if you know that your printer tends to have tighter tolerances it probably wouldn't hurt to scale it of a half a percent or so.  

Tagi