Canpedo - Soda Can drink holder Koozie
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is just a fun model designed to hold a 66mm can (standard 12oz size) loosely based on the shape of a naval torpedo.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 55
- Makes
- 2
- Views
- 293
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Summer
- License
- Creative Commons — Attribution — Noncommercial
I wanted to come up with a fun summer design for a drink holder. I decided to go with a torpedo inspired design since we live in a large Navy area. I printed this in a red white and blue theme, but it also works well as a single color.
This model also has a vent in the bottom because I found out that not all cans are made the same and some were nearly an air tight fit. I wanted it to be a tight fit but some are just too tight. Although we did discover that the vent hole can kinda double as a squirt gun depending on how snug the fit is.
If you run into fitment issues or if you know that your printer tends to have tighter tolerances it probably wouldn't hurt to scale it of a half a percent or so.