WE Apache Magpul Style Handguard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Magpul style handguard for the WE Apache.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 154
- Wydruki
- 1
- Wyświetlenia
- 676
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
A Magpul style handguard for the WE Apache.
Installation
You may need to drill out the front pin holes to 6/6.5mm to get a snug fit. I've drilled the left hole out to 6mm and the other to 6.5mm to get a good tight fit. There is also a tab that can to be screwed in to tighten things up further, should just need a countersunk M3x8mm screw.
Printing
Print in the orientation shown in the screenshot, alternatively you can print from the base straight up.
I have also set a fuzzy skin on mine, I think that .1 point distance and thickness works well. Although I think it would look a lot nicer in a matte filament.