Display Stand for Thirst Zapper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple display with printable base
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Share Alike
There are two different holders:
2x with holes for m4 heat inserts (HI)
2x with regular holes to tap in a m4 thread (noHI)
Also two bases (parted and full).
You can also use a wooden base (templates and dimensions included).
The holes in the holders are all 10mm deep, if you get a thicker or thinner base calculate your lenght of countersunk screws in.
4x M4 screws are needed.
I used a wooden mdf base with 12mm and M4x16mm countersunk screws.
-------------------------------------------------------
There are also files in f3d and step format included if you need or want to edit it!
-------------------------------------------------------
PLA settings:
Print settings base: 4-5 walls / infill 10-15% / 4-5 top and bottom layers / brim / 0,2-0,25mm layers
Print settings holders: 5 walls / infill 50% / 4-5 top and bottom layers / brim / 0,2-0,25mm layers