Display Stand for Thirst Zapper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple display with printable base
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 67
- Makes
- 0
- Views
- 248
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Share Alike
There are two different holders:
2x with holes for m4 heat inserts (HI)
2x with regular holes to tap in a m4 thread (noHI)
Also two bases (parted and full).
You can also use a wooden base (templates and dimensions included).
The holes in the holders are all 10mm deep, if you get a thicker or thinner base calculate your lenght of countersunk screws in.
4x M4 screws are needed.
I used a wooden mdf base with 12mm and M4x16mm countersunk screws.
-------------------------------------------------------
There are also files in f3d and step format included if you need or want to edit it!
-------------------------------------------------------
PLA settings:
Print settings base: 4-5 walls / infill 10-15% / 4-5 top and bottom layers / brim / 0,2-0,25mm layers
Print settings holders: 5 walls / infill 50% / 4-5 top and bottom layers / brim / 0,2-0,25mm layers