Baby Jogger City Tour handlebars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rised handlebars for stroller Baby Jogger City Tour
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 292
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
I designed this handlebar which elevates the grabing of stroller “Baby Jogger City Tour” about 6cm.
It is necessary to print 2 of each part 1 and 2, and also will need:
4xM4/M5 washers
4xM4 nuts
4xM4x16 bolts
Print settings:
I recommend using ABS. PLA is discouraged since it will creep a lot and will suffer a lot during summer times. Also PETG might work, but in my case, one of the handlebars I made in PETG broke after I dropped it.
Use a heavy duty profile, something like 0.2mm layer height, 5 to 7 walls and 0.6 line width, with at least 35% infill.
I made mines without supports and it suffered a little bit in overhangs, but I think putting supports will be an overkill.