Baby Jogger City Tour handlebars
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rised handlebars for stroller Baby Jogger City Tour
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 19
- Makes
- 0
- Views
- 292
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
I designed this handlebar which elevates the grabing of stroller “Baby Jogger City Tour” about 6cm.
It is necessary to print 2 of each part 1 and 2, and also will need:
4xM4/M5 washers
4xM4 nuts
4xM4x16 bolts
Print settings:
I recommend using ABS. PLA is discouraged since it will creep a lot and will suffer a lot during summer times. Also PETG might work, but in my case, one of the handlebars I made in PETG broke after I dropped it.
Use a heavy duty profile, something like 0.2mm layer height, 5 to 7 walls and 0.6 line width, with at least 35% infill.
I made mines without supports and it suffered a little bit in overhangs, but I think putting supports will be an overkill.