Python - Ultimate Bambu Lab AMS - Silica Gel Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Notice!
This is only compatible with Python for the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty.
About
This is a set of front mounted Silica Gel Boxes for the Python to keep the moisture in the enclosure at a minimum. They slide into the front dovetails of Python.
A “normal” Python setup with four spools use three Silica Gel Boxes.
Notice: It is not compatible with a stock AMS setup.
The pictures below are from an earlier version of the boxes but they're basically the same except the lid and locking mechanism with a printed M14 screw.
One box can hold around 110 g of undried silica gel. It's a good idea to use the optional funnel when filling it.
A set of three filled to the brim with undried silica gel is around 430 g.
Print settings
All parts print without supports and it uses a sliding lid. The funnel is optional but makes loading much easier.
BOM - Bill of materials
Silica gel beads.
For the Hygrometer box you also need a small round hygrometer (mini) with a 41 mm diameter which you can pick up from AliExpress for example. I bought a bunch since they're so cheap:
Optional
I highly recommend these Nano Coated Helical Extruder Gears from FYSETC, I use them for all my Bambu printers, they're inexpensive and offer a number of improvements of the stock gears: