Yuki Air Cooler - Snowflake
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desk fan with ice air cooling
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 772
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Summer
- Licencja
- Creative Commons — Public Domain
I recommend downloading the Print Files (gcodes)
Printer requirements:
0.6mm nozzle with at least 200x200x200mm build volume
---
body_snowflake.gcode , uphere_body_snowflake.gcode:
Two versions of Yuki's body, "body_snowflake.gcode" fits any 120mm pc fan, "uphere_body_snowflake.gcode" is specific for "Uphere 120mm pc fan". Run a "5V Uphere USB 120mm fan" at up to 12V with a "usb fan speed controller" to get maximum airwflow at low noise. Prints with 170g of PLA in 11h. Ender 3 v2 gives the best outer surface smoothness. Get original Yuki color with “Xightongzhilian silk blue PLA”
---
cap.gcode:
Prints with 25g of Polipropylene in 1h45m. Apply polypropylene adhesive tape to the heatbed to ensure part adhesion. Tested with Formfutura PP
---
icepack.gcode:
Prints with 100g of Polipropylene in 8h. Apply polypropylene adhesive tape to the heatbed to ensure part adhesion. Tested with Formfutura PP
---
Website: https://www.riverfamily.art/
---
Slicing video: https://youtu.be/3wivfIi9iO4
---
Contact: [email protected]