40 Gramm Crankbait / Wobbler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a swimming crankbait, its optimum weight is somewhere around the 30-40gr range. Its designed to run in a depth o
- Ocena
- 0 / 5
- Polubienia
- 61
- Pobrania
- 313
- Wydruki
- 0
- Wyświetlenia
- 2006
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Instructions
1 - Print both halfs
2 - Insert 4x3 4mm lead BBs to the triangular lead holes
3 - Cut 3 pieces of Filament to use as alignment pins, insert them into the 3 alignment holes. Use epoxy glue to mate the two shells together
4 - Twist some wire ( i use tig filler rod ) to form the linetie and hook hangers
5 - use 5 min epoxy to glue in the hook hangers and line tie
6 - Hang the bait from the linetie and either brush on or dip the bait into UV curing resin, let it drip off so you only have a thin coat and cure it in the sun or under a UV light
7 - Sand the bait as smooth as you want. the resin already makes it near perfect, so minimal sanding is required
8 - Paint the bait to your likings, let the creativity flow, Glue 5mm 3d Eyes in the sockets
9 - clearcoat it either with another layer of clear UV resin or 2 part epoxy
10 - DONE, go out to your favourite spot and catch some pikes!
Design Process
This bait is based on a well known premium bait, works just as the original!