40 Gramm Crankbait / Wobbler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a swimming crankbait, its optimum weight is somewhere around the 30-40gr range. Its designed to run in a depth o
- Rating
- 0 / 5
- Likes
- 61
- Downloads
- 313
- Makes
- 0
- Views
- 2,006
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Instructions
1 - Print both halfs
2 - Insert 4x3 4mm lead BBs to the triangular lead holes
3 - Cut 3 pieces of Filament to use as alignment pins, insert them into the 3 alignment holes. Use epoxy glue to mate the two shells together
4 - Twist some wire ( i use tig filler rod ) to form the linetie and hook hangers
5 - use 5 min epoxy to glue in the hook hangers and line tie
6 - Hang the bait from the linetie and either brush on or dip the bait into UV curing resin, let it drip off so you only have a thin coat and cure it in the sun or under a UV light
7 - Sand the bait as smooth as you want. the resin already makes it near perfect, so minimal sanding is required
8 - Paint the bait to your likings, let the creativity flow, Glue 5mm 3d Eyes in the sockets
9 - clearcoat it either with another layer of clear UV resin or 2 part epoxy
10 - DONE, go out to your favourite spot and catch some pikes!
Design Process
This bait is based on a well known premium bait, works just as the original!