36 models
This is my first go at designing a full size printed Crankbait. I think the finished model and results (fish caught) where well worth the effort. The bait is printed in two halves and then glued together. (I used super glue) Three small…
This is version 2 of my Ultralight Crankbait. In this version I changed the shape a bit, added some gill details and it now uses preformed figure 8 hook hangers for tie on's. I used #0 stainless steel sinker eyes. You can get a 100 of…
This is just another Crankbait I made.. this one a redesign of a lure I carved out of balsa wood 25 years ago. I'm still working out the best infill settings so this is a* "Work in Progress" * for now. I did a short write up on my website…
To be honest I've never really made lures before, I've modified spinners a bit and tied crappy looking flies before but seeing Marling Baits on youtube make the tiniest crankbait, inspired me to make a tiny crankbait of my own. I present…
Required for assembly: 5 mm steel balls, you can use lead split shot but I haven't tried it 0.8 mm (0.031 inches) Stainless Steel wire. If you have thicker wire let me know I can make more versions with bigger holes. 5 mm eyes Super Glue…
This is a clear lip version of my Crankbait Fishing Lure . I used the included lip template to trace and cut a lip out of .093 clear lexan polycarbonate sheet. * I used #4 Treble Hooks and #3 Split Rings on these. * See Crankbait Fishing…
This is another lipless rattletrap type crankbait I designed. This is a little different then a normal type lipless lure as I tried to make the body a little wider in hopes it would maybe dive a little deeper or have a different kind of…
To assemble: Print the model. Glue 3 or 4 BBs, depending on how hard you want it to float, into each of the 4 weight chambers. (Leave a few loose if you want the bait to rattle) Bend and glue wire in for the line tie and hook hangers.…
This is a flat side Crankbait type lure. I found a simple pattern online for making them out of wood and decided to duplicate it in CAD for 3D printing. There are two versions of this one... the first one I printed looked awful skinny so…
These Ultralight Crankbaits were inspired by rallekralle11's tink crankbaits they are just a little more stream line but being so they don't have as much action (wobble) as his. They still work great and I caught a ton of Bluegills and…
To assemble: Print the model. Glue 2 - 4 BBs, depending on how hard you want it to float, into each of the 4 weight chambers. (Leave a few loose if you want the bait to rattle) Bend and glue wire in for the joint hardware, line tie and…
Inspired by: https://www.thingiverse.com/thing:2463713 A more agressive Version of the Original I re-designed the whole thing from scratch, so measurements will differ, i also taylored it to materials i use for the hook hangers ect. Main…
This versatile fishing lure is designed for customization, featuring internal cavities for adding weights (up to 11 mm in diameter, 2x), as well as a dedicated cavity for steel wires to secure your fishing line and treble hooks. For ease…
Lil Cranky Swimming Crankbait The bait runs about 0.5m deep, length is 45mm. I recommend using an SLA printer to make one, but it might also work with FDM, didnt try that though so if you do it, please tell me how it went! The belly is…
Update 1 July 2024: Fixed a symmetry issue Removed the unnecessary air chamber Changed the design of the weight chamber, it now accepts 3 x 6 mm balls Made it thicker to hold more weight For print orientation, check the 3mf file with…
Instructions 1 - Print both halfs 2 - Insert 4x3 4mm lead BBs to the triangular lead holes 3 - Cut 3 pieces of Filament to use as alignment pins, insert them into the 3 alignment holes. Use epoxy glue to mate the two shells together 4 -…
This is a simple lure. Assembly will require some hardware from your local fishing tackle shop. The points for the hooks are indicated by the circular bases in the ideal locations. Changing infill density will change the depth and…
This is a remix of one of my best producing crankbaits. Injured or wounded bait fish attend to attract more bites so I added a nice bite to the original crankbait (more so for fun) but maybe it will turn up the bite also…. The build…
Fishing lure designed mainly for trout spinning. The main body contains slot for the bent wire montage, which is filled with epoxy glue, and fin support that can be easily snipped off with pliers. Main body is made from PLA, with max. 30%…
Bass fishing lures, Salt water fishing lures, Stick baits, Crank baits, Top water baits, glide baits ...whew. There are a lot of baits. And all of those baits are have a lot of sharp pointy hooks. If you are like most of us fisherpeople,…
Inspired by: https://www.thingiverse.com/thing:2463713 A more agressive Version of the Original I re-designed the whole thing from scratch, so measurements will differ, i also taylored it to materials i use for the hook hangers ect. Main…
Print with height 0.1mm Use rouded jewellery screw for joint with line. Add hooks and use for fishing!
Print with height 0.1mm Use rouded jewellery screw for joint with line and hooks. Use roundrign for joint hooks, use small hooks. Add hooks and use for fishing!
Roughly 10% infill and 2 perimeters with PLA should give a similar density to balsa. Here are the original tutorials:
Printing Print like this with a support blocker to block supports from getting in the weight hole but make sure to have supports for the tail end. Instructions Based off of the 6th Sense Snatch Lipless Crankbait Design. This design calls…
Alike my popper model this fishing lure uses the same weighting method just different placement for a different action. When cutting into parts just use your best judgement based on the video on where to cut. This is the usually the…
If you have started using the crankbait keeper lure tube system (search crankbait keeper on this print library) you probably have a lot of tubes by now. I do. They self organize neatly into drifts in my tackle bag, but I have wished I…
This model is a compact, modern lipless crankbait (rattlin-style) fishing lure , fully designed for 3D printing. The body features a slightly faceted, futuristic shape and is optimized as a single solid print. The treble hooks shown in…
Did you know that tackle bag compartments are a standard size? This is why you can purchase tackle box inserts that stack neatly inside of your tackle bag. These tackle bag inserts are ¼ the size of a standard tackle box - which means you…
To print and assemble this lure: Print at 95% infill Supports neccesary Use a 5mm Raft Screw in 4x8mm Eyelet screws There are 3 holes, but I only used 2 because I had a treble hook Attach 3mm eyes with a dot of glue A like and a comment…
To print this lure: Print at 95% infill SUPPORTS NECCESARY Use a 5mm raft Screw in 4x8mm eyelet screws Attach 5mm eyes with a dot of glue A like would be highly appreciated;) Happy fishing!
To print and assemble this lure: Print at 75% to 85%. Insert one 4.5mm BB into Body and Head during print. To assemble, insert 4x8mm eyelet screws into holes. Then put 22 gauge wire through the screw eyes in the middle of the bait and…
