RV Camper Water Heater Drain Chute
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drain chute for my camper water heater. Designed to fit older model Suburban SW6P.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 641
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Where there is a problem you can find a solution. I hate how the water collects in the bottom of my RV water heater when I drain it at the end of a camping weekend. With the issue of wood getting wet, rotting, and falling apart I decided to find a solution. The option on Amazon did not look like it fit all that well and why not design my own and this is what I came up with.
Magnets in the end are glued into place to hold the chute during draining process. Link to the magnet I used below. Need to first test to see if it fits.
Test1: Way to small all around
Rev1: Sizing close to correct but not happy with fitment.
Rev2: Looking to lower the chute and add a large radius to match the base plus added/fit another magnet to each side.
Amazon Magnet
https://www.amazon.com/dp/B0CDH1297R?ref=ppx_yo2ov_dt_b_product_details&th=1