RV Camper Water Heater Drain Chute
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Drain chute for my camper water heater. Designed to fit older model Suburban SW6P.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 90
- Makes
- 0
- Views
- 647
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Where there is a problem you can find a solution. I hate how the water collects in the bottom of my RV water heater when I drain it at the end of a camping weekend. With the issue of wood getting wet, rotting, and falling apart I decided to find a solution. The option on Amazon did not look like it fit all that well and why not design my own and this is what I came up with.
Magnets in the end are glued into place to hold the chute during draining process. Link to the magnet I used below. Need to first test to see if it fits.
Test1: Way to small all around
Rev1: Sizing close to correct but not happy with fitment.
Rev2: Looking to lower the chute and add a large radius to match the base plus added/fit another magnet to each side.
Amazon Magnet
https://www.amazon.com/dp/B0CDH1297R?ref=ppx_yo2ov_dt_b_product_details&th=1