XDA Profile Keycap for 0.4 nozzle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keycap with XDA profile for Cherry MX mount optimized for printing with 0.4 nozzle.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 154
- Wydruki
- 2
- Wyświetlenia
- 778
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
Keycap with XDA profile. Suitable for any switches with Cherry MX type mount: Cherry MX, Gateron, Outemu etc. Designed to be printed with nozzle of 0.4mm or less. Square switch mount mechanism for better durability and possibility of printing with a bigger nozzle.
Use A version for classic Cherry MX style switch mounts and B for Boxed ones. Use B if you're not sure which type of mounts you have.
Print still on the bed. Use Archimedean Chords or Concentric top fill for best look, no post-processing required. Adjust the extrusion width for even top layer wall width.
Possible problems with the mount tolerance can be resolved with adjusting flow rate, keycap should hold on tight to the switch.