Torsen differential - Limited-slip differential
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3d printed model of a type of limited-slip differential called torsen differential. Used to showcase and understand.
- Ocena
- 4,5 / 5
- Polubienia
- 125
- Pobrania
- 696
- Wydruki
- 2
- Wyświetlenia
- 4677
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Share Alike
This project features a 3D printed model of a Torsen differential, a type of limited-slip differential used in automotive applications to improve traction. The model is designed for educational purposes, allowing enthusiasts and students to explore the mechanics and functionality of a Torsen differential through a hands-on approach. More at: https://github.com/Dmitrii-Tomin/torsen_differential
1 housing.stl
1 housing_top.stl
2 Sun_gear.stl
6 planet_gear.stl
1 stand.stl
1 bevel_gear.stl
1 stopper.stl (cut the flange if needed or don't use)
2 wheel.stl
5 608 bearings: 8x22x7 mm.
3 M4 bolts: 15-40 mm in length (recommended countersunk screw minimum 20mm
in length).12 M5 bolts: 20 mm in length (I used one 20mm screw and one 25mm screw for
each planet gear).7 M3 nuts
7 M3 grub screws: recomended at least 6mm, smaller ones might fall out.
3 Aluminium rods: 8 mm in diameter. 85, 75 and 93 mm in length (doesn't really
matter, but by using this dimentions they will have the perfect length and stick out
equally)
Assembly guide in files .pdf