Manual solder flux dispenser for 3ml syringe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flux dispenser
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 1034
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Manual solder flux dispenser for 3ml syringe - better placement and amount of flux.
The secret is the spring, when you let go - it sucks the flux into the syringe again. No wasted flux.
Brass Insert:M4x4x6 https://www.amazon.de/-/en/gp/product/B09B7F2XM3
Springs: 9.5 x 19 mm https://www.amazon.de/-/en/gp/product/B07WFPPXXX
Spacer: None used
Tips: https://www.amazon.de/-/en/BENECREAT-Plastic-Tapered-Dispenser-Adhesive/dp/B09Y9132SK
Luer Lock Coupling Adapter: https://www.amazon.de/-/en/gp/product/B0BNPH8XBX
(No need for support material)
The small hinge hole may need a small drill 0.8
Could be printed reverse for right handed.
Do you need to change it - do it in FreeCad - remember to credit the original author.