Side filament brackets for Snapmaker J1S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Side supports to place the filaments on dryers. Use a PTFE tube (ID 2MM OD 4MM).
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 493
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Side supports to place the filaments on dryers. The holders guide a PTFE tube (ID 2MM OD 4MM) to prevent filament from getting stuck and flow without obstruction.
The files contain a support model with compartments to store the tools supplied by snapmaker and another model without compartments.
Also, a guide for the back and a bushing to connect the 4mm PTFE tube with the original tube of the printer.
It is recommended to print without supports (see images) and with the Luban "fast printing" configuration. With the exception of the bushing (TFSM004), it is recommended to print with the normal printing configuration.
To install the supports, you need to replace the screws that hold the acrylic with others with the same string but with a length of at least 12mm (M3x12).
Any comments will be welcome.