P
Printables
Wyniki wyszukiwania: j1s
Liczymy pasujące modele…
P
Printables
Snapmaker J1 J1s SnapDryer Polydryer Rear Mount
Previously I had a Sunlu S1 Drybox mounted to the rear of my J1, but recently I upgraded to the Snapmaker SnapDryer (aka Polymaker Polydryer ) and were able to fit both the dryer itself with two storage boxes to the rear of the machine.…
P
Printables
Snapmaker j1 /j1s filament spool holder
You will need to mirror and print 2 mounting pieces, and 4pcs 3x6mm screws. I recommend using pedg filament or abs
P
Printables
Snapmaker J1/J1S front bed latch
Recently the front plastic on the bed latches broke on my J1S and made a quick model of the one that was still completely together. It, too, broke today so I was able to get them both replaced. Using the mirror function on the J1/J1S will…
P
Printables
Snapmaker J1/J1S PTFE guide 90dg
The model is a new design with a 90-degree bend that allows the PTFE tube to be there even with the lid on and without having to print a raised section for the lid. This is the first version, and the filament can easily get stuck in the…
P
Printables
Snapmaker J1 / J1S Simple Fan Shroud Upgrade
This is a direct replacement of the stock Snapmaker J1 / J1S part cooling fan shroud. It moves the air directly to the tip of the nozzle, and not onto the heat block as the original one does. The air should also flow better on all sides,…
P
Printables
Snapmaker J1 J1s Polydryer , eBOX lite side mounting brackets
eSUN eBox , Polymaker PolyDryer を左右に設置できます。 左右共通で作ってあります J1に接続するチューブは eBox , PolyDryerに付属しているものを使います。 チューブを連結するパーツは「https://www.thingiverse.com/thing:5781828」に素晴らしいパーツがあるので、それを使用してください。(写真の黒いパーツです) eBOX下の板はABS、PCを推奨。 その他はPLAで製作。…
P
Printables
Snapmaker J1 /J1s Display Cover
画面の保護や、誤った操作の防止、子供のいたずら防止などにお使いください。 必要ならカバーの内側に布などを貼ってください。傷防止になります。 TPUで作りましたが、PLAでもいいと思います。 snapmakerのロゴを0.1ｍｍ低くしているので、ペイント機能で塗分けできます。 サポートは必要ありません。
P
Printables
Snapmaker J1 / J1S PTFE tube guide M6 and M10
Makes it easier to feed filament into the extruder with this attached PTFE tube connector. This will not work with the standard lid on, you need to print an elevation adapter like this…
P
Printables
Snapmaker J1/J1s Tophat
The factory filament routing on the Snapmaker J1/J1s IDEX 3D printer requires a sharp bend at the top of the print head. The filament guides frequently rub against the top of the printer. This tophat adds an additional 80mm of height to…
P
Printables
Printable Snapmaker J1/J1s 40mm Riser
A completely printable 40 mm lid riser/top hat for the Snapmaker J1 or J1s. Inspired by edgett’s “Snapmaker J1/J1s Tophat” here on Printables which requires custom aluminum sides and Thomas Levendig's "Top Panel Riser - For Snapmaker J1"…
P
Printables
Snapmaker J1 or J1S tophat printable remix with Chamber Heater
Printable side panels and corners. Use M4x12 screws with inserts. The holes on the corners are good enough that you don't need inserts. You can use nuts and M4 bolts to attach the panels together. You need 6 short panels,2 long panels, 4…
P
Printables
New type of bowden connector for Snapmaker J1/J1s
WARNING : Don't use it without the bowden tube being attached because the connector can rotate and bump into the LED strip when homing. NEWS : I've attached a version 2 (june 2024) that lets you bypass the bowden tube without ever having…
P
Printables
Snapmaker J1 /J1s Display Cover
what was changed: separated fonts - now it's possible to print it with second extruder
P
Printables
Snapmaker J1s bed model and plate texture
Bed model STL is almost the same as packed with orca slicer except that glass clips added Texture has more changes: Triangle marks added Size 325x202 instead 324x200 Extruders inaccessibility zones updated Mirror dash line added Center…
P
Printables
Snapmaker J1/J1s Clamped Bowden Connecter
A (slightly) modified version of the bowden connector by @rlasse_315212. I noticed a comment on the original model that I liked (thanks @SnowHead_224364) that mentioned splitting it to allow the new connectors to be fully printed before…
P
Printables
Side filament brackets for Snapmaker J1S
Side supports to place the filaments on dryers. The holders guide a PTFE tube (ID 2MM OD 4MM) to prevent filament from getting stuck and flow without obstruction. The files contain a support model with compartments to store the tools…
P
Printables
Leveling feet with mild shock absorbing capability for Snapmaker J1/J1S with Construction Zone Caution theme
If your 3D printer is a constant "construction zone" why not replace the feet on your printer with the yellow/black construction caution theme. This replaces the four feet on the bottom of the Snapmaker J1/J1S with feet that have a…