1 / 7
80 / 100 / 125 / 150 mm Light Trap for Grow tent * Update
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Light Trap to protect you Grow Tent interior from light - 80 mm
- Ocena
- 4,75 / 5
- Polubienia
- 93
- Pobrania
- 892
- Wydruki
- 3
- Wyświetlenia
- 3655
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (24)Wydruki i komentarze (Wydruki: 3) (Komentarze: 7)Remiksy (1)Kolekcje (128)Powiązane
Description
Easy to print, no supports
Idea
I needed a Light trap for my Grow Tent. The tent has a 80mm cable routing hole in the bottom. This pipe fits in and you can add a mesh at the end.
Feel free to ask me adaptations or other sizes
*Update 1
Added 100mm and 125mm
*Big Update 2
- Adapted each version to have more play. Only the Cap has now the end-size. This should help to insert the bases in your tent
- Added 150mm
8 Versions
- with thread and the option to add a mesh
- without thread - you can glue the cap or install without the cap
What do you need?
- Mosquito mesh if you want to secure the entrance
Printing instructions
I printed all on an Creality K1
I used Sunlu PETG, but you can print it with your desired material
| Parts | Quality | Support | Infill | Brim | Walls | Top-/Bottom Layer |
| Pipe and cap | 0.2mm | No | 15% Rectilinear | Not necessary | 2 | 3-5 |