Toothpick Frame Drone (Firefly inspired)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After breaking the frame of my Flywoo Firefly Toothpick, I wanted to create a frame that I could easily 3D print.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 708
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After breaking the frame of my Flywoo Firefly Toothpick, I wanted to create a frame that I could easily 3D print.
So I made this frame. I did some tests with PETG with 100% filling and the results were good.
You need to use a filament that is hard but with some flexibility.
I then created a whoop part that I printed in TBU 95 that can be installed easily and it's the drone's battery that holds everything in place (for added security I added clamps). This makes it possible to fly in tight spaces and to protect the propellers quickly. However, you might want to use a harder TPU, such as 70D.
Obviously when you use the whoop part you need to do a few tests with your drone to make sure that the motors can take the extra weight.
Translated with DeepL.com (free version)