Toothpick Frame Drone (Firefly inspired)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After breaking the frame of my Flywoo Firefly Toothpick, I wanted to create a frame that I could easily 3D print.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 90
- Makes
- 0
- Views
- 708
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After breaking the frame of my Flywoo Firefly Toothpick, I wanted to create a frame that I could easily 3D print.
So I made this frame. I did some tests with PETG with 100% filling and the results were good.
You need to use a filament that is hard but with some flexibility.
I then created a whoop part that I printed in TBU 95 that can be installed easily and it's the drone's battery that holds everything in place (for added security I added clamps). This makes it possible to fly in tight spaces and to protect the propellers quickly. However, you might want to use a harder TPU, such as 70D.
Obviously when you use the whoop part you need to do a few tests with your drone to make sure that the motors can take the extra weight.
Translated with DeepL.com (free version)