9gm Micro Servo Housing (Case) - ver 1.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Servo Housing for 9gm Servo.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is housing and case for 9 gm servo.
Both combined weighs about 10 gm.
2 base plates are provided. One Don't have the screw holes further down and the other have the screw holes extending further down to allow longer screw and more stronger attachment of the housing with the base plate.
Actually only 4 screws (next to the servo) of the 6 are needed to secure the servo housing with the base plate.
The servo need to be screwed in to the support pillars.
The main idea was to have easily serviceable servo and also secure enough that it wouldn't fall off easily.
Note: If needed to change the servo side, you can flip/mirror this in Slicer and achieve the same without actually needing Left/Right models :).